HMN TR-942 - HMN TR-942G Polyethylene

This high density polyethylene resin is an
ethylene-hexene copolymer tailored for
rotational molding applications that require:
• Wide process windows
• Excellent impact strength
• Good flow
• Good ESCR
• Durability
This resin is available in two physical forms:
• Pellet form – HMN TR-942
• 35 US mesh powder – HMN TR-942G
Typical applications for HMN TR-942 and HMN
TR-942G include:
• Potable water and chemical tanks
• Agricultural equipment
This resin meets these specifications:
• ASTM D4976 – PE 233
• FDA 21 CFR 177.1520(c) 3.2a, – Use conditions B through H per 21
CFR 176.170(c) Table 2 for single use articles contacting food types I,
II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all
food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty
foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the
finished articles are to have a volume of at least 18.9 liters (5 gallons).
• FMVSS.302 burn test
• NSF / ANSI Standard 61 for potable water (CLD 23)
• Long term UV stabilization – ASTM 2565 (Cycle 1): greater than UV-20